Saturday, April 8, 2017

TRANSFERING to 3D PRINTING LLAMA blog

›
Over the coming weeks I will be transfering everything here over to the 3D Printing Llama Blog. I'm hoping by consolidating ev...
1 comment:
Sunday, November 6, 2016

Level the X to Y Axis before leveling your bed.

›
 The blog is moving over to The  3D Printing Llama  blog. Trying to consolidate all the info and make it easier to organize and find. th...
Monday, September 12, 2016

Square is as important as level!

›
 The blog is moving over to The 3D Printing Llama blog. Trying to consolidate all the info and make it easier to organize and find. th...
4 comments:
Thursday, August 18, 2016

Cold pull cleaning when nozzle is off...

›
So,.. had a very minor something or other slightly clogging my nozzle.  Wasn't terrible but was enough to make the thread do the little ...
Wednesday, August 17, 2016

Cold assemble your hot end (and how to prevent breaking heat break tube)

›
This post has been moved to " The 3D Printing Llama " blog. Trying to orginize and clean up all the different 3D related pres...
Sunday, August 7, 2016

Centering the bed

›
This Post has been moved to The 3D Printing Llama Blog Trying to consolidate all my info into one easy to find location. here is the...
15 comments:
Tuesday, August 2, 2016

Review: Makergeek's Raptor PLA

›
PLA is the main material used in our home based FDM printers. It's reasonably cheap, easy to get, and requires the least amount of fiddl...
8 comments: